Does two thermostats mean two zones?

The thermostat in each zone controls the temperature in the zone. If you currently have two thermostats controlling two zones you will want two Nest thermostats. You do not need to upgrade them both at the same time. Do Nest thermostats talk to each other?

How to reset Dometic duo thermostat Comfort Control?

Duo-Therm Comfort Control Reset 1 Turn the device on and the light and annunciator data are there. If they are, move on to step 2 and if they aren’t, consult your manual section 5.1. 2 Press the mode button to activate the annunciator light. 3 Then, at the same time, press the up and down buttons and hold.

Can a multi zone thermostat be replaced?

The Dometic Multi-Zone Comfort Control Center Thermostat can control your Dometic heating and cooling appliances. Can this replace a 5 button CCC thermostat or do I need to also change the boards in the rooftop units as well?

Which is the best Dometic thermostat for camping?

Complete temperature control. The Dometic Multi-Zone Comfort Control Center Thermostat can control your Dometic heating and cooling appliances. Weather you are camping in the middle of winter or driving in the hot and humid conditions of the summer, this Dometic Atwood Thermostat is perfect control.

Is the Dometic CT single zone thermostat dangerous?

WARNING This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to

What does Zone 2 mean on duo thermostat?

When I changed to zone 2 there was no display except for the “2” indicating zone 2, also the backlight was lit. I then reset the thermostat per manual by turning thermostat off, holding down zone and mode buttons and then turning the thermostat on. When the thermostat rebooted only zone 1 is now available.

How does duo-therm comfort control thermostat work?

Have a Duo-therm comfort control thermostat (5 button) with 2 air conditioners and a furnace. Have not used the ac for a while. Zone 1 I turned on the ac set the temperature and the ac came on as normal. When I changed to zone 2 there was no display except for the “2” indicating zone 2, also the backlight was lit.