How do I reset my ecobee access code

Navigate to the login page on your mobile device, or web browser.Select “Forgot password?” and enter the email address associated with your ecobee account.You should receive an email with a link to reset your password. … Once you complete, you will receive a final confirmation email.

Where do I find my ecobee access code?

This code is obtained by doing the following on your ecobee thermostat’s screen: 1. Tap the three horizontal bars on the bottom left corner of the ecobee screen to open the Main Menu. After completing these steps, the code will then be displayed on the thermostat’s screen.

How do I factory reset my ecobee?

1. From the Home screen, press Menu.
2. Select Settings.
3. Go to Reset.
4. Choose Reset All Settings then confirm your selection by pressing Yes.
5. Choose the reset option that suits your needs: …
6. The ecobee thermostat will be reset to factory defaults.

How do I reset my ecobee user access code?

1. Login to ecobee.com.
2. Click on SETTINGS > ACCESS CONTROL.
3. Click “Disable”

What happens if I reset my ecobee?

If you choose to “Reset All,” your ecobee will be wiped clean and returned to factory settings. Your ecobee account will be deleted, as will your schedule, preferences, and equipment configuration. You will need to set up your ecobee from scratch once again.

How do I reset my ecobee?

1. Go to your Ecobee Thermostat’s main menu.
2. Hit Settings.
3. Hit Reset.
4. Hit Reset Registration.
5. Confirm and hit Yes.

What is RC and RH on ecobee?

With dual-transformer systems you’ll have two R wires—one from the cooling transformer (Rc) and one from the heating transformer (Rh). Learn how to install an ecobee thermostat in a dual-transformer system. Rc. If you don’t have an Rh wire, Rc serves as both the cooling and heating power wire.

What is white wire on thermostat?

The white wire underneath your thermostat connects to your heating system. It terminates at your air handler or furnace. The white wire connects to terminal W in industry-standard thermostats.

What is the O B Wire?

O, B, O/B: These wires are responsible for switching the changeover valve in a heat pump system. The O wire reverses the valve from heating to cooling, and the B wire switches the valve from cooling to heating. Sometimes it might be a single O/B wire instead of two separate wires.

Does R go to RC or RH ecobee?

If you installed the PEK in step 3, the R (or Rc or Rh) wire must connect to the Rc terminal on the ecobee3, or the thermostat will not power on. The wires from the wall should plug easily into the terminal blocks.

Article first time published on

How do I reset my Ecobee thermostat?

1. On the thermostat, go to MAIN MENU > SETTINGS > RESET.
2. Tap RESET REGISTRATION.
3. Tap YES in the bottom right to confirm.

How do I know if I have an O or B wire?

Look for connectors that have labels that are the same as your thermostat. For instance, you might find labels like R, W, G, Y, C or O/B. You should find wires attached to these connectors that are the same color as the wires that connect to your thermostat.

What color is the OB wire?

It’s usually blue, but it may also be black, brown or purple. The O or orange wire connects to your heat pump (if applicable).

Is B wire same as C wire?

The common wire, usually labeled C, should go in the C Terminal of the Zen Thermostat. A wire labeled O, B, or O/B is used to control whether a heat pump is in heating or cooling mode. However, on some thermostats, a wire labeled B is the common wire C. In most cases, the common wire is labeled C.

What do the different color wires mean on a thermostat?

This is the most typical thermostat wiring style, and it applies to systems that regulate both heat and air conditioning. The wires are typically arranged as follows: red for 24-volt hot, white for heat, yellow for cooling, green for the fan, and blue for common (although the common wire may be a different color).

What color is the C wire on a thermostat?

Blue wires are also called “C” wires because they are the Common wire. C wires are necessary for any “smart” thermostat that needs to be connected to a power source 24/7, regardless of your heat pump type.

Can I use ecobee without C wire?

Even though it comes with an adapter for missing c-wires, ecobee is what we’d pick even for systems with a c-wire. If you’ve got a 24v HVAC system but no C-wire, check out the ecobee product line. Every ecobee ships with an adapter that you can install yourself at your furnace to make up for a missing C-wire.

Is Rh wire necessary?

The RH wire refers to “red heating” which means that this is the connection you need in order to power the heating system of your air conditioning unit. Yes, even your air conditioning unit has a heating system to keep the temperature in balance.

Is my heat pump O or B?

O stands for orange and B for dark blue. The O and B terminals are for heat pumps; the B terminal is used in conjunction with Rheem, Ruud, or any other manufacturer that energizes the reversing valve in the heat pump’s heating mode.

Why is there a jumper between R and RC?

Effectively there isn’t a second RH wire, although there is an RH terminal. However, the heating still needs to be controlled, so a wire known as a jumper is connected between the RC and the RH terminals so that power gets to the heating control part of the thermostat.

What does R and W mean on thermostat?

W wire – heat. R wire – heat power. W wire – heat.

How do I fix no power to Rh wire?

To fix an E74 error or no power to the Rh wire error on your Nest thermostat, check for loose connections and fix them. If that does not work, clean out the drain pipes and check if the condensate pump associated with your HVAC is clogged.

What are the 4 wires on a thermostat?

• Red wire for power (24V).
• White wire for heating (connected to W or W1 terminal).
• Green wire for fans.
• Blue or yellow wire for cooling (connected to Y).

What happens if you wire a thermostat wrong?

Potential consequences of improper installation could include: Electric shock. Blowing a circuit breaker. Damaging the thermostat unit, the electrical system or even the AC/furnace unit itself.

What is the B terminal on my furnace?

W/B: The W/B terminal controls the heat relay or valve. When the thermostat calls for heat, a signal is sent to power up the furnace and the blower fan or the boiler, heating your home.

What is B on heat pump?

The O/B terminal is for heat pump systems and is used for the reversing valve. … If the “B” option/position is selected the reversing valve defaults to the cooling mode. It is extremely import that the correct mode is selected. If you get it reversed the heat pump will cool in the heat mode, and heat in the cool mode.