Installing or replacing a toilet seat is a fairly straightforward job. Whether you’re replacing your loo seat because it’s old, damaged or you want a new style; all you’ll need are some basic tools.
Is it easy to replace toilet seat?
Installing or replacing a toilet seat is a fairly straightforward job. Whether you’re replacing your loo seat because it’s old, damaged or you want a new style; all you’ll need are some basic tools.
How do I know what toilet seat to get?
Start by measuring the seat from back to front. Buy a standard round seat if the length is around 16 in (41 cm). If it’s around 18 in (46 cm) long, go with an elongated seat. Things get a little more complicated if your toilet is old or if you’re investing in a specialty seat.
Do all toilet seats fit the same?
As we said, toilet seats come in two sizes: round and elongated. Every toilet seat is one of these two, indicated on its packaging. Using a tape measure, determine the distance between the center of the mounting holes in the back of the toilet. … Our seats are designed to fit most manufacturers’ round or elongated bowls.Are there different size toilet seats?
Toilet seats don’t come in sizes, but they do come in two different shapes: round toilet seats and elongated toilet seats, each of which correspond to two different toilet bowl shapes. … Elongated toilet seats are becoming more popular, and they have a long oval shape.
How do you remove plastic bolts from old toilet seats?
If the bolts or nuts are plastic, they can’t corrode and will come off easily. Simply pry open the cover behind the seat to expose the bolt’s head. Unscrew the bolt with a pliers or a screwdriver while you hold the nut underneath with the pliers.
What are common toilet seat sizes?
Typical width: 14″ – 14-1/2″ Typical round length: 16″ – 17″ Typical elongated/extended length: 18″ – 19″
What is bottom fixing toilet seat?
A bottom fixing is a more traditional style fixing, with two bolts that fit down into your pan and are then tightened from underneath. Top fixing hinges are used when there is no access to the bottom of the pan, like in some back to wall toilets, or modern one-piece style toilets.How much does it cost to replace toilet seat?
The national average materials cost to install a toilet seat is $47.78 per seat, with a range between $28.25 to $67.32. The total price for labor and materials per seat is $133.78, coming in between $106.05 to $161.52. Your actual price will depend on your location, job size, conditions and finish options you choose.
How do you know if your toilet seat is round or elongated?You can determine the shape by measuring the distance from the back of the toilet bowl to its front edge. Here’s how you do it. If the length is between 18-19.5 inches, you have an elongated toilet bowl seat. If the length is between 17-17.75 inches, you have a round toilet bowl seat.
Article first time published onHow do I stop my toilet seat from sliding sideways?
- Lower the seat and locate the two screw covers at the back of the seat. …
- Put the flat-head screwdriver in the screw slot and hold it steady while you unscrew the nut from underneath the bowl. …
- Remove the nut and bolt and take the seat off the bowl. …
- Insert the screw back in the holes.
Can I put an elongated toilet seat on a round toilet?
An elongated toilet seat will technically fit on a round toilet, but the fit and comfort may be compromised. An elongated toilet seat will likely overhang a round toilet which may be fine unless the rim of the toilet is visible within the opening of the toilet seat.
How do I choose the right size toilet seat?
Measure the width of the bowl at its widest point. Be sure to place your measuring tape on the outside of the brim for an accurate dimension. Measure the length of the bowl from between the seat bolts to the outside edge of the front of the bowl. If you have a round bowl, this dimension should be about 16.5 inches.
What size is an elongated toilet seat?
Elongated toilet seats measure about 18.5 inches long and about 14 inches wide. Elongated toilet seats are preferred by many, especially men, because of their extended size. Because of its popularity, this is the seat that is standard in most large businesses such as hotels, gas stations, and airports.
What size are toilet seat bolts?
The bolts have a 7/16-inch diameter that fits most standard toilet seats.
What tools are needed to replace a toilet seat?
- Replacement toilet seat.
- Tape measure.
- Screwdriver.
- Pliers.
- Rust penetrant (optional)
- ½” OR 5/8” socket or combination wrench, depending on the toilet seat.
How do you take apart a toilet seat?
- Many new toilet seats are attached to the toilet bowl with two plastic bolts and nuts. …
- Remove the Bolts.
- To remove the seat, hold the nut while unscrewing the bolt. …
- Use a Basin Wrench for Tight Spaces.
- If you have a tight space to work in, you may need a basin wrench (tool on the far right). …
- Remove the Toilet Seat.
How do you remove a quick release toilet seat?
Most modern toilet seats will have a quick release button to help you take it on and off easily. Press the button and lift the seat up. With a screwdriver, lift up the seat fixing caps to get to the bolts underneath. With your screwdriver, unscrew both of the bolts.
When should I replace my toilet seat?
The average toilet seat lasts just 5 to 7 years before it cracks, begins to shift noticeably (and uncomfortably) when you’re sitting on it, or becomes hopelessly stained. The difference in lifespan between toilet and seat means at some point you’ll have to replace the toilet seat with a new one.
How much does a plumber charge to install a bidet toilet seat?
This type of job requires more knowledge and expertise. Hiring a plumber costs between $50 to $200 per hour and most bidet installations only cost around $220. If you attempt a DIY installation and end up making a mistake, the cost to fix a toilet is $230 on average.
Why does my toilet seat keep moving?
Toilet seats often wobble because the holes in the toilet-bowl rim are larger than the diameter of the bolts, allowing movement that eventually makes the nuts loose. Tightening the nuts seldom works very well. … Another approach is to install self-adhesive rubber washers between the lid and top of the toilet bowl.
