How does a slide out camper work in an Arctic fox?

A rack and pinion Power Gear slide out mechanism in an Arctic Fox camper is shown. In a rack and pinion slide mechanism, an electric motor turns a gear box. That turns a shaft that spans the width of the slide-out room.

How big is the slide out on an Arctic fox 990?

Doug explained that the slide out on an Arctic Fox 990 goes out 26-inches which dramatically increases the floor space. On a slide out camper, there is usually a two-way switch on the interior to operate the slide room or rooms.

What is the service manual for Arctic Cat?

Thanks for visiting! 1. FOREWORD This Arctic Cat Service Manual contains service, maintenance, and troubleshooting information for certain 2007 Arctic Cat ATV models (see cover). The complete manual is designed to aid service personnel in service-oriented applications.

How does the Lippert electric slideout system work?

The Lippert Electric Slideout Systemis a rack & pinion guide system, utilizing an electric ball screw actuator to move the room assembly. The motor drives the ball screw in a forward and backward motion to drive the slide room in and out. The actuator comes equipped with an automatic clutching system.

Where is the slide out switch on an Arctic fox 990?

This switch is normally located close to the door to allow the owner to slide the slide rooms out before entering the unit. Doug showed us the slide-out switch on an Arctic Fox 990 located close to the floor by the rear door. When you press this switch to the in or out position, the slide opens or closes.

What do you need to know about electric slideout system?

1. Level the unit. 2. Verify the battery is fully charged and hooked-up to the electrical system. 3. Remove the transit bars (if so equipped). 4. Press and hold the IN/OUT switch (Fig. 1B) in the OUT position until the room is fully extended and stops moving. 5. Release the switch, which will lock the room into position.