How many Litres is a CF 50 waeco?
With vertical space for 1.5 litre bottles and a capacity for 68 cans, this fridge also comes with a reinforced wire basket with divider and interior LED lights, so reaching in the grabbing your beverage has never been easier.
How much power does a waeco CFX 50 use?
Short description:
| Capacity: | 41 litres (holds 40 cans in the basket) |
|---|---|
| Dimensions | W455 x H471 xD661 mm (D725 with handles) |
| Weight: | 20.4 kg |
| Power Input | 12 / 24 Volts DC 100-240V AC (Approx 60 watts on AC) |
| Consumption | Ave. Power Consumption: 0.77 amps/hr (@ 12V, 5°C interior, 32°C ambient temperature) USB outlet rated @ 5V, 500 mA |
What temperature should my Waeco fridge be?
approximately 2-3°C
In fact, the ideal temperature for your fridge compartment is approximately 2-3°C as this offers the perfect balance between having your food spoiled and having your food frozen. The freezer compartment should be at a temperature of approximately -10°C to -20°C depending on what you want to keep frozen.
What should the battery voltage be on a WAECO refrigerator?
Using a volt meter I discovered that even on medium battery protection the fridge was cutting out around 12.3/12.4v. on medium t should cut out much lower. With it set to low my fridge is working fine and the battery is still sat at 12.4v, 12.3 when the compressor is running.
Why does my Waeco fridge turn off too early?
As a few people have experienced the waeco can cut out (battery protection) even on a full battery a little too early, many suggested it was voltage drop off across the cable. I was always reluctant to set it to low as that could in theory could damage the battery.
What should the temp be on my WAECO cf-50?
Problem with my Waeco CF-50… Problem with my Waeco CF-50. Temp set to -1C. Temp reads anything from 25 to 50C, but beer is freezing and bursting cans. Is thermostat faulty?
Why is my Dometic WAECO CFX 50 not working?
That means when you apply a load (run an appliance) the voltage goes down, but will recover when you turn the appliance off. Your fridge should have a Low – Medium – High setting for automatic low voltage disconnect. Try setting to Low. My waeco cfx 50 not working on 240v or 12v, the internal light works ok, no display on the led.
When did the Waeco car fridge come out?
Yes, lots. We bought our Waeco car fridge in 2007, with a Waeco fridge slide. It was a promotional pack: fridge, insulating cover, tie down straps, a RAPS (Waeco 12V power unit with one Merritt socket and one cigarette lighter socket), and a portable 36Ah battery.
You can easily set 3 levels of battery voltage. LOW – the fridge will cut out at 10.4V (use when connected to a 2nd battery). MED – the fridge will cut out at 11.4V. HIGH – the fridge will cut out at 12.0V (use when connected to starting battery). 100Ah second battery is tucked in on the side (to the left of the fridge).
As a few people have experienced the waeco can cut out (battery protection) even on a full battery a little too early, many suggested it was voltage drop off across the cable. I was always reluctant to set it to low as that could in theory could damage the battery.
Why does my Waeco thermistor say 80 degrees?
80 is the maximum temperature the fridge will display, so is a good indication the thermistor has shorted out internally. I’ll explain this further below. When this happens, the fridge runs constantly. It’s trying to bring the temperature down to the setpoint. The result? Everything in the fridge freezes solid!
