What does no fl mean on RV fridge?
“No Fl” does indeed mean no flame. If you have the fridge set for auto and there is no 120v power available, it will try to run on LP. If the flame does not light or goes out, you will get the “No Fl” message. You may need to clean the burner tube.
Where is the no AC code on my Norcold refrigerator?
Thanks to this forum my “no AC” error code was easy to diagnose, although lifting that black box cover on the rear of the fridge yielded a few choice words of frustration. The 5 amp auto fuse under the black box cover was good, but the Buss glass fuse, 5 amp 250 volt, was black from end to end.
Why does my Refrigerator have an RF error code?
A rF error code indicates an abnormality in the refrigerator’s fan motor. This may be due to frost buildup. Unplug the unit and remove all food and ice from the ice bin. Leave the doors open and wait at least 8 HOURS for the refrigerator to defrost. Make sure to keep towels in and around the unit to soak up any excess water after the frost melts.
What does error code or 15 mean on LG refrigerator?
IS or 15 error code indicates a problem with the ice maker fan motor or a disconnection of the icemaker sensor. For this error code, unfortunately there is no troubleshooting that can be performed. The unit will require a repair service, please visit our Request a Repair page.
What does a co error code on a refrigerator mean?
A CO error code on the display of the refrigerator indicates a communication error between the control board and the display. Unfortunately, there are no troubleshooting steps to resolve this issue. The unit will require a repair service, please visit our Request a Repair page.
Thanks to this forum my “no AC” error code was easy to diagnose, although lifting that black box cover on the rear of the fridge yielded a few choice words of frustration. The 5 amp auto fuse under the black box cover was good, but the Buss glass fuse, 5 amp 250 volt, was black from end to end.
What does a fault code on a refrigerator mean?
Fault Codes. Fault Code Meaning. Corrective Actions. No display. DC voltage is unavailable to the refrigerator control panel or the refrigerator is OFF. – That the refrigerator is ON. – That the battery charging equipment of the vehicle is operational.
What to do if your refrigerator won’t turn on?
The ARP control, however, will not only shut the power off if it exceeds safe levels for the refrigerator that could result in a fire, it will also cut power before any dangers can occur to the refrigerator, lengthening the lifespan of your cooling unit.
Where is the AC plug on a refrigerator?
The AC plug that you see in the back is only powering your AC Heater/s that will cool the refrigerator when running it on AC or Auto Mode. The 12V DC powers the rear power board, the front control board, and the interior light. What to check! Check the input 12V DC reading on the inbound power lines coming to the refrigerator board.
