What does the blink code mean Onan generator?
They use a blink and pause design to make their numbered codes clear and not confusing. For example, if the light blinks 5 times then pauses, then blinks 1 more time, that signifies Fault Code 51. To learn more about the different Onan Fault Codes, what they mean and how to fix the problem, just keep reading our article.
What does it mean when the genset controller blinks?
The genset controller provides extensive diagnos- tics by causing the status indicator light on the Con- trol Switch to blink in a coded fashion. Following a fault shutdown, the indicator light will repeatedly blink 2, 3 or 4 blinks at a time. • Two blinks indicates a low oil pressure fault. • Three blinks indicates a service fault.
When do fault codes 3 and 4 stop blinking?
•Note: Fault Code Nos. 3 and 4 are first level faults. Avoid interpreting them as second-level Fault Code Nos. 33 and 44, which have not been assigned as fault codes. Restoring Fault Code Blinking – The fault code stops blinking after five minutes (15 minutes, Series HGJAA). Press Stop three times within five sec- onds to restore blinking.
What does it mean when your computer blinks 3 times?
• Three blinks indicates a service fault. Press Stop once to cause the two-digit, second- level fault code to blink. (Pressing Stop again will stop the blinking.)The two-digit code con- sists of 1, 2, 3, 4 or 5 blinks, a brief pause, and then 1 to 9 blinks.
What does not in auto warning mean on a generator?
The local display shows Not In Auto Warning. The fault lamp illuminates red, the alarm horn sounds, and cranking stops when the unit does not start within the defined cranking period. The local display shows Over Crank Shutdwn. See Section 2.3.1, Auto Starting, and Section 1.3.1, Status Event and Fault Specifications for cyclic crank specifications
What does the fault code on my Generator mean?
The fault lamp illuminates yellow and the alarm horn sounds when the battery charger malfunctions. This fault feature requires an optional battery charger with a malfunction output for the lamp to function. Local display shows Batt Chg Flt Warning.
When does the fault lamp on a generator go red?
The fault lamp illuminates yellow and the alarm horn sounds when the generator set master control button is in the RUN or OFF/RESET mode. The local display shows Not In Auto Warning. The fault lamp illuminates red, the alarm horn sounds, and cranking stops when the unit does not start within the defined cranking period.
What does the low oil pressure warning mean on a generator?
The low oil pressure warning does not function during first the 30 seconds after startup. The local display shows Oil Press Low Warning. The fault lamp illuminates yellow and the alarm horn sounds when the generator set master control button is in the RUN or OFF/RESET mode.
