What is the difference between Moen cartridge 1200 and 1225

Moen 1200 has an all-round brass design which ensures longevity in the long run. But in terms of performance, Moen 1225 can offer you better performance with its 1GPM water discharge rate. While Moen 1200 does not support Posi-Temp shower valves, Moen 1225 is compatible with almost any faucet.

Are the Moen 1225 and 1200 interchangeable?

NO! While the Moen 1200 and the Moen 1225 cartridges are interchangeable, the Moen 1222 Posi Temp cartridge is absolutely not interchangeable with the Moen 1225 or 1200. … That’s why it’s so vital that you determine which Moen shower valve you have before buying any replacement parts.

What is the most common Moen shower cartridge?

Moen shower valve models There are many models of Moen shower faucets. But the most common takes the standard Moen 1225 cartridge, 1200 cartridge and the pressure balancing Moen 1222 cartridge.

How do I know which Moen cartridge I need?

The easiest way to find the Moen shower valve replacement cartridge you need is to know the series or model number of your Moen bathroom faucet. Exact information for these comes with any paperwork you have received when you first installed the original shower faucet (hopefully you saved it).

Is there a difference between Moen 1225 and 1225B?

The difference between the 1225 and the 1225B is with the packaging. The cartridges are exactly the same, the package in which the part is displayed is different.

Are all Moen Posi Temp valves the same?

For many years Moen tub/shower valves have been manufactured using one of three valves. These valves are Standard, Posi-Temp and Moentrol. Although the look is similar, the trim is not necessarily interchangeable. … If this is the way your Moen valve operates, any Posi-Temp trim will fit.

How do I know what shower cartridge to buy?

Use a caliper or ruler and measure the cartridge. Do this by measuring from the base to the tip (from seat to splines). Pay attention to the length tier of your cartridge (Lengths range from 1–12). Next, identify the broach pattern with the broach chart (see page B-5).

What size Allen wrench does Moen use?

For the most part, Moen uses hardware that will require a 7/64 inch hex wrench. This applies to Moen Renzo faucets, handle set screws on one-handle kitchen faucets, and PosiTemp levers in Moen showers.

Are all shower cartridges the same?

Although you’ll find many variations on a theme out there, there are only a few basic shower valve cartridge types. The original style was called a compression faucet and had two handles: One for hot water and one for cold. Each faucet has a valve regulating water flow and an onboard washer to create a pressure seal.

How do I know what model Moen faucet I have?

Exact model numbers can be found on your box or on your instruction sheet. If unavailable, you may find the general family series number on the back of the spout (non pullout).

Article first time published on

Is Pfister compatible with Moen?

Save time and money by installing the new Pfister Universal Tub & Shower. … Compatible with existing Delta, Moen and Pfister valves already installed. Beautiful designs in a variety of finishes provides multiple choices for your upgrade project. A 5-function showerhead delivers an experience that is right for you.

How do I identify my Moen kitchen faucet?

Exact model numbers can be found on your box or on your instruction sheet. If unavailable, you may find the general family series number on the back of the spout (non pullout).

Are Moen cartridges interchangeable?

Moen shower faucets cartridges are not universal and therefore not interchangeable. … The faucets they are installed in work differently. The main difference between the Moen 1222 and 1225 cartridges is that faucets with the 1225 cartridge have water volume control while faucets with the1225 cartridge don’t.

Is Moen 12801 the same as 1225?

Upload complete! Yes! They are the same cartridge. 12801 is the number on the cartridge, but 1225 is the number on the package.

How do you lubricate a Moen 1200 cartridge?

For one-handle faucets with a 1225 cartridge, simply remove the cartridge and lubricate it both inside and out with a silicone-based grease (Moen part number 99915). Do not use plumber’s grade faucet grease, silicon sprays or any lubricant that may contain petroleum.

How do you clean a Moen 1225 cartridge?

Place the cartridge in a large container and soak it in vinegar or citric acid for seven hours, then rinse it thoroughly with clean water and allow to air dry.

How much does a plumber charge to change a shower cartridge?

FactorAverage costPlumber’s labor$90 – $270Total$100 – $350

What year did Moen Posi-Temp come out?

The design goal is to maintain the temperature of the shower for safety and comfort reasons, even if the volume of water is reduced. This was followed by the Posi-Temp cycling valve in 1985, which uses the larger 1222 cartridge.

How do I identify my Moen valve?

Look closely at the handle buttons that were attached to the shower valve. Typically, “Moen” will be written in the middle of the “Hot” and “Cold” buttons. If you do not see this, the handle buttons have been replaced, or the “Hot/Cold” button is a lever (wall escutcheon).

What's the difference between Moentrol and Posi-Temp?

Moentrol and Posi-temp is up to the user. With Moentrol you can set the temp and pull the handle to get your pre-set temp. With Posi-temp you have to pass cold to get to hot and no volume control.

What is the Moen logo?

The Moen logo has been specially created for our brand. It features the waterdrop symbol, the Moen wordmark and our long-established tagline. The full-color logo is always preferred and should be used whenever possible.

How do I identify my kitchen faucet cartridge?

Find the logo. The first and easiest way to find out the brand of your kitchen faucet will be if you can locate the logo somewhere on it. …
Find a model number. …
Count the splines on the broach and measure the stem. …
Distinguishing features. …
Use a broach gauge.

Can you replace shower cartridge without turning off water?

When you disassemble the valve to repair it water will flow unless turned off. so the answer would be No the water needs to be turned off to repair the internals of a valve.

How do I know my Allen key size?

Measure the Hex Key Hex keys measurements are done across-flats or AF. This simply means that they are measured from one flat side of the head to the one directly across from it.

What size Allen wrench Do I need to remove a Moen shower handle?

The handle set screw can be removed with a 7/64 wrench. APhillips screwdriver is used to remove the handle.

Where can I get free replacement parts for Moen?

Replacement parts may be obtained by calling 1-800-289-6636 (Canada 1-800-465-6130), or by writing to Moen Incorporated, 25300 Al Moen Drive, North OImsted, OH 44070-8022. Proof of purchase (original sales receipt) from the original consumer purchaser must accompany all warranty claims.

What is Moen Mcore?

M-CORE valves and cartridges have pressure-balancing capabilities designed to control temperature fluctuations in the event of water pressure changes in the home. … M-CORE valves and cartridges also feature volume control, allowing you to adjust the flow of water.

Can you replace shower handle with different brand?

Yes, the handle is just a pretty shiny lever with a set screw to hold it on. If you find out the brand you can usually go to the plumber supply house ( or maybe a used parts place) and get a replacement. You can also contact the manufacturer online for the bigger brands, they send replacement parts too.

Do you have to replace faucet with same brand?

would recommend you purchase from the same manufacturer if you were changing out a lot more faucets (to make getting repair parts easier if necessary at some later date), but for your scale, probably fine.