What is the first thing that happens when the pilot turns on the burner?
The basic idea behind a pilot light is simple. Its purpose is to provide the flame needed to light the gas coming out of the main burner. When the furnace “turns on”, a valve releases gas into the burner and the pilot light ignites that gas.
What to do if you have the wrong pilot light?
If you have the wrong pilot burner replace it with the correct one. Important: Before troubleshooting the pilot light, keep in mind that a pilot flame is always ON and the flame should be blue. If it is yellow, it needs an adjustment. Make sure that the tank is completely filled with water before lighting the pilot light.
What happens when there is no pilot light on a gas heater?
If there is no pilot light or is blown out, the tip of the thermocouple cools off and stops generating electricity so the gas valve closes and the unit shuts off. Every gas appliance is equipped with similar safety devices, prevent gas leaking inside the house.
What should the pilot flame be on a propane tank?
Important: Before troubleshooting the pilot light, keep in mind that a pilot flame is always ON and the flame should be blue. If it is yellow, it needs an adjustment. Make sure that the tank is completely filled with water before lighting the pilot light.
How to light a pilot light after gas is shut off?
Once the pilot light stays lit, rotate the pilot control knob to the “on” position, and confirm that the main burner is lit. Replace the pilot light panel cover and repeat the steps for any other gas appliances with pilot lights that need to be lit.
If you have the wrong pilot burner replace it with the correct one. Important: Before troubleshooting the pilot light, keep in mind that a pilot flame is always ON and the flame should be blue. If it is yellow, it needs an adjustment. Make sure that the tank is completely filled with water before lighting the pilot light.
Where is the pilot light on my furnace?
Locate the pilot light and look for the tip of a copper rod very nearby. That’s the thermocouple. Can’t Find the Pilot Light? If you’re having trouble locating the pilot or thermocouple, double-check to make sure your unit actually has a standing pilot light.
How to troubleshoot pilot light in gas water heater?
When troubleshooting lighting problems, it is recommended to test it first. Turn the gas OFF to the water heater and press the piezo igniter. Once pressed, the electrode should release the spark. Check if the wire connection is tightened correctly. Make sure the electrode is not broken, and replace it if it is.
