What should I do if my pilot light keeps going out?
Find the pilot valve, which should be near to the gas burners and will be labelled as a pilot light with an ‘on’, ‘off’ and ‘pilot’ setting. Turn it to ‘off’. Leave the boiler open for around five minutes so any potentially dangerous flammable gases can dissipate.
Why does the pilot light on my furnace keep going out?
The thermocouple is the copper rod the pilot flame directly hits. Sometimes it’s referred to as the “flame sensor.” It’s a safety mechanism that shuts the gas off should the pilot go out. If the thermocouple fails to shut off the gas, all the gas flowing through the furnace could get into your home.
Why does the pilot go out when I let go the button?
I hold the pilot button down until the status flashes but the pilot goes out when i let go the button. I was told there is a reset button so i pushed what i thought was the reset but it doesn’t push or click.
Is it safe to leave the pilot light out on a boiler?
When this valve senses no flame the gas will be cut off and any build-up of dangerous gases will be prevented. Regardless of this fact, it is not recommended you leave a pilot light out for any prolonged period of time. How do you relight the pilot light on a boiler?
What happens when the pilot light goes out?
Otherwise known as the flame sensor, the thermocouple automatically shuts off the gas if the pilot light goes out. When the thermocouple is dirty, broken, or misaligned, it can’t see your flame. As a result, it is continually assuming that your pilot light is out.
How do you light a gas pilot light?
A pilot flame is lit with a manual push button spark ignitor or a handheld lighter while pushing down on the pilot plunger button found on the top of the gas valve. To light a gas pilot, the button on the combination gas valve must be pushed down which allows gas to enter the pilot tube and exit through the pilot termination head.
What happens if pilot light is not working on gas heater?
If your pilot light isn’t working on a gas heater, your gas valve can potentially continue to release gas in the air. Enough gas in the air causes a potentially dangerous situation, which can sometimes lead to major fires. If this is a concern, the easiest way to solve this issue is by turning off the gas valve on your water heater.
What to do when your propane pilot light goes out?
If there is any gas odor or if there are any odors that could mask the smell of propane, such as musty or damp smells, do not attempt to relight the pilot light or use any flames, lights, or any other device that can cause sparks, such as cell phones, landline phones, or electrical appliances.
