What should torque be on caterpillar 3126B engine?
The pump shaft rotates freely and there is no obvious mechanical damage that would indicate a different failure. Repair: Tighten the drive gear bolt to a torque of 110 ± 14 N·m (80 ± 10 lb ft). Check the pressure in order to ensure that the problem has been resolved.
What are the codes on a Caterpillar engine?
Connect the electronic service tool to the engine and start the engine. Check for the following codes: 164-00 or 164-11 is active or logged. Place a check beside the codes that are active or logged. Yes – 164-00 or 164-11 is active or logged. 164-02 may also be active or logged.
What does 164-11 mean on an ECM?
164-11 is defined as a injection actuation pressure system fault. It basically means the pressure is not what the ECM wants. It could be too low or too high. It takes 200 psi off from what the ECM wants to set this code.
What are the symptoms of a caterpillar fuel problem?
The following symptoms may occur if there is a problem with the HEUI fuel system: The engine cranks but the engine will not start. The engine runs rough. The engine is erratic or unstable at idle or running. The following fault codes might be currently active codes or logged event codes: 164-00, 164-02 and 164-11.
The pump shaft rotates freely and there is no obvious mechanical damage that would indicate a different failure. Repair: Tighten the drive gear bolt to a torque of 110 ± 14 N·m (80 ± 10 lb ft). Check the pressure in order to ensure that the problem has been resolved.
Connect the electronic service tool to the engine and start the engine. Check for the following codes: 164-00 or 164-11 is active or logged. Place a check beside the codes that are active or logged. Yes – 164-00 or 164-11 is active or logged. 164-02 may also be active or logged.
164-11 is defined as a injection actuation pressure system fault. It basically means the pressure is not what the ECM wants. It could be too low or too high. It takes 200 psi off from what the ECM wants to set this code.
The following symptoms may occur if there is a problem with the HEUI fuel system: The engine cranks but the engine will not start. The engine runs rough. The engine is erratic or unstable at idle or running. The following fault codes might be currently active codes or logged event codes: 164-00, 164-02 and 164-11.
